| 产地 | 西班牙 |
|---|---|
| 产品规格 | 18GK |
| 产品型号 | RUST KEEPER ELM-430 |
| 规格 | ELM-430 |
| 类别 | 蜡膜防锈油 |
| 执行标准 | 欧标 |
| 主要用途 | 防锈 |
| 品牌 | BRUGAROLAS S.A |
| 闪点℃ | 70 |
| 纯度﹪ | 100（%） |
| 准入认证 | 欧盟 |
RUST KEEPER ELM-430 蜡膜防锈油
APPLICATIONS 产品应用
RUST KEEPER ELM-430 isa dry-to-touch waxy film corrosive product, for the protection of any partstored in adverse conditions (outdoor, sea freighted parts) such as machinedparts, car parts or general machinery, internal parts of cars, moulds, stampedparts, etc.
RUST KEEPER ELM-430 是一款干式蜡膜防锈油产品，用于保护储存在严苛条件下的各类零件（室外、海运零件） 如机械元件、汽车零部件或通用机械、汽车内部零件、模具、冲压零件等等。
PROPERTIES 产品性能
The application of RUSTKEEPER ELM-430 does not require any particular requirement.Actually, it can be applied by dipping, gun, or brush. It builds a thintransparent dry-to-touch film resistant to further handling of the part. Thepackages remain clean.
使用 RUSTKEEPER ELM-430 无任何特殊要求，可以通过浸浴、加脂枪或刷子应用。 本品提供一层透明干燥可指触的防锈油膜，可指触工作。请保持包装清洁。
此防锈油膜可借由溶剂或碱性去油剂去除。
WAY TO USE 使用方法
RUST KEEPER ELM-430 canbe applied with gun, brush or by dipping.
RUST KEEPER ELM-430 可通过加油枪、刷子或浸浴的方法来进行使用。
Whenever dipped, due to the solvent content, the tank will besealed to avoid evaporation loss. It is suggested light stirring before use.
由于产品中含有溶剂，每当浸浴时，需密封包装桶，以避免溶剂蒸发。建议请先轻搅拌后使用。
When RUST KEEPER ELM-430 is applied to machined parts, thesurface will be clean and dry, and oil or grease remnant from previousoperation will be removed.
在机械部件上涂抹本品前，表面务必保持清洁、干燥，并清除以前残留的油或油脂。
RUST KEEPER ELM-430 drums must be stored underroof and far from any heat focus.
RUST KEEPER ELM-430 必须储藏在室内， 并且远离任何热源。
ADVANTAGES 产品优势
? Greatprotection power. 高保护性。
? Darkprotective film. 深色保护薄膜。
? Highcoating power. 高刷涂性。
? Easeto remove. 易于去除。
CAUTIONS 注意事项
There is available the MSDS of the product, according to theeffective European normative.
本品可根据相关有效欧洲标准提供物料信息安全表。
PACKAGING 包装规格
18KG/DRUM.
18 公斤桶装。
PHYSICO-CHEMICAL CHARACTERISTICS 理化指标
| Appearance | Viscous liquid |
| Colour | Dark brown |
| Kind of film | Waxy |
| Flash point, (oC) | 70 |
| Drying time, (hours) | Max. 1 |
| Coating capacity, approx., (m2/kg) | 11 |
| Thickness layer in microns, 涂层厚度（微米） | Min. 60 |
| Salt spray chamber, (hours 小时) | > 600 |
| Way to removal | Solvents and alkaline detergents |
| Application temperature, (oC) | 10 to 35 |